Garage door cables are an extremely important part of your garage door system. Without them, your torsion and extension springs in your door system can wear out and become damaged. When a spring breaks it can be extremely dangerous as people are killed each year by garage door spring accidents.
The door cable acts as a safety net between your door tracks and the springs. The cables help the springs to lift and close the door to help put less tension on the springs. This helps your garage system to last longer. Repairing broken cables is quite easy. You can buy replacement parts for your door at warehouse stores like The Local Garage Door Repair. These cables usually run anywhere from $25-$50 dollars. Once you have the repair parts, simply replace the existing cables with the new ones. Make sure to have the garage closed when making repairs. Once the cables have been replaced, stand at least 15 feet away and open the garage door. Staying far enough away is important in case you installed the cables wrong and a spring breaks. If the door opens and closes, make sure the check the repair work you have accomplished every six months. Cables stretch and cause slack which can continue to put too much stress on the overhead motor and the springs. If the cables become loose, simply cut the end of the cable and shorten it to bring up any slack. Article Source: http://EzineArticles.com/2764682
0 Comments
Timely garage door repair is absolutely essential because an open or unlocked garage door is a terrible security risk. Getting the door repaired often can be quite an expensive proposition. In fact, you should be able to deal with most minor issues on your own, thereby reducing the need for professional help. The following tips will help you save quite a bit of money on garage door repair costs:
1. Keep the area clean and free of obstacles: The tracks on which the door moves might become clogged with dirt and debris over time and should therefore be cleaned often. The rollers and hinges should also be kept lubricated using a high quality lubricant. Keep in mind that the track, chain and the chain rail should never be lubricated because this will result in the accumulation of more dirt. 2. Realign the sensors: The sensors can easily go out of alignment on account of frequent use and this will result in a blinking light. Alignment can be done manually. Problems can also be caused when the sensors are obstructed due to any reason. Dirt and moisture are common reasons for sensors not working. 3. Tighten any loose components: Any loose nuts and bolts can result in a great deal of noise when the door opener is in operation. Be sure to disconnect the power supply to the unit before you open it to make any repairs or else you might get injured. 4. Make adjustments for springs that have become loose: Springs become loose over time and as a result the door does not close or open fully. Adjusting the limit switch does help, but you could also have the springs changed entirely. It is best to get rid of very old springs or else there will be too much pressure on the motor. The problems mentioned above are very common but you can see that they are fairly easy to deal with. You need to go over your garage door and its opening mechanism every four to six months in order to ensure that it is in great working condition. This will help you save quite a bit on garage door repair costs since you can avoid most major problems that require professional help. Even so, you should call in a reliable repair technician in case there is a problem that you are unable to handle so that your AE Garage Door Repair, Carpentersville is in good working condition. Article Source: http://EzineArticles.com/8052590 |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2019
Categories |